The AIR-1 allows you to control the temperature and humidity within your growing environment. Connect your ventilation equipment (air conditioner, fan, etc.) to the exhaust outlet. Then set your temperature and humidity to the level that you wish to mainta...
The AIR-2 has the same features as the AIR-1 with the exception of separate temperature and humidity outlets. This allows you to control the temperature and humidity independently. Once you have connected your temperature control device (air conditioner, fa...
The AIR-3 expands our line of atmospheric controllers by providing the ability to coordinate supplemental CO2 with your ventilation equipment. The AIR-3's operation is similar to the AIR-1, with the addition of a photo cell and CO2 outlets. The photo cell e...
The AIR-4 has all the features of the AIR-3 with the addition of independent temperature and humidity controls. It also has an increased power capacity to control up to 15 amps of equipment. An additional outlet is provided which will power equipment only d...
Green Air Products bottled CO2 emitter systems combine a forged brass flow gauge
regulator with a UL/CE/CSA certified emitter solenoid valve. These systems offer a
flow range from 7-20 SCFH. The BCDE systems come with 10 feet of clear tubing with
spring clamps, a grounded 6ft 120 volt...
The CO2-2 has two timers that are used to add just the right amount of CO2 without the wasteful “overshoot“ that other controllers have. One timer controls the length of time the CO2 is released and the other controls how often the CO2 is released. The res...
The CO2-4 has four timers that are used to control your CO2. In addition to all the features of the CO2-2, the CO2-4 adds two additional internal timers. The “Overall Cycle timer“ allows the user to decide how long the supplemental CO2 is kept in the growi...
The PPM-3 from C.A.P. is the most affordable and simple CO2 controller available. Its' proven technology is very accurate at measuring levels of Carbon Dioxide in your growing area from 0 to 5000 ppm (Parts-Per-Million). Using the PPM-3 is quite simple. Just plug your CO2 device (CO2 valve or gen...
The PPM-1C is an extremely accurate Carbon Dioxide/CO2 sensor. It measures the exact level of CO2 in your growing area and displays this value from 0 to 5000 Part-Per-Million (PPM) on its digital readout. Even though the PPM-1c is not realized until it is connected to one of the three controllers...
The CGC-1 Complete Greenhouse Controller controls all of the main devices required in today's modern hydroponic garden. Your garden's HID lights are controlled by a precision 24-hour time clock. Two outlets are provided for your lights. Other functions such as supplemental CO2 and hydroponic pump...
People who need the absolute best CO2 controller available today, use the PPM-2a from C.A.P. What sets the PPM-2a apart from the competition?
Fuzzy Logic(tm)... Fuzzy Logic(tm) can be compared to a good driver. As a good driver approaches a red light, he or she applies the brakes to graduall...
CAP's CO2 Regulator assembly combines a precision regulator/ flow gauge and an industrial solenoid valve. The flow gaugecan be set from .5 to 15 SCFH. Designed to work with any 120 volt control device. Complete with 6 foot power cable and 10
foot of 1/4" air line.
CAP's dual-tank CO2 regulator assembly combines a precision regulator / flow gauge and an industrial solenoid valve. The unique ability to connect the REG-2 to TWO tanks of compressed CO2 allows double the run time between changing out the tanks. The flow gauge can be set from .5 to 15 SCFH. Desi...
Control ALL your equipment from ONE compact, reliable controller!
The XGC-1 is the best all in one controller ever made. The specifications of the XGC-1 are identical in every way to the CGC-1, except for the addition of Fuzzy Logic(tm) CO2 control built in! Fuzzy Logic(tm) can be compa...
